edrcports

Package: WA2L/edrc 1.5.57
Section: File Formats (4)
Updated: 22 September 2024
Index Return to Main Contents

NAME

edrcports - directory of network ports and protocols used by WA2L/edrc

SYNOPSIS

AVAILABILITY

WA2L/edrc

DESCRIPTION

This is a directory of network ports used by default by the WA2L/edrc package.

The following table shows the ports needed for a certain WA2L/edrc command/service to be able to run.

Index:

x =: mandatory, needed for base functionality
+ =: mandatory, needed on bidirectional connection (between WA2L/edrc systems)
. =: not mandatory, but needed if tools shall be used on bidirectional connection (between WA2L/edrc systems)
L =: localhost connection only.
! =: default port (can be changed in configuration file or on command line)

Reasonable User Experience: WA2L/edrc

For a reasonable user experience and most common use where WA2L/edrc is installed on multiple nodes within customer environment(s), at least the following protocols and ports should be enabled for use. This enables the use of the base functionality of WA2L/edrc without using advanced capabilities of the toolset:

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

SSH	TCP	22	+	+	edrc
					(and: sat, asup, psup,
ICMP	IP	-			sys, rsat, lots)

DNS	TCP/UDP	53

HTTPS	TCP	443		x	edrc → edrcupgrade	download

Details: SSH

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

SSH	TCP	22	+	+	edrc → distribute	also for:
					edrc → edrcupgrade	sat, asup,
					edrc → tail	psup, sys,
					edrc → trunk	lots

					filedist
					is_up
					passwdsyncd
					rcmd
					remote_copy
					remote_shell
					rsat

			.	x	loggrep
					lgrep
					rcat
					rcomm
					rdiff
					rosid
					rsync
					rssh
					shell host
					ssh-exec
					sys2html
					syspoll
					whoisin

Details: ICMP, SMB

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

ICMP	IP	-	+	+	edrc → distribute	also for:
ECHO					edrc → edrcupgrade	sat, asup,
					edrc → tail	psup, sys,
					edrc → trunk	lots
					is_up

			.	x	edrc → ping

					traceroute

SMB	TCP	135	.	x	syspoll	WMI
		445			winexe
					wmic

Details: RPC

Most likely in your WA2L/edrc environment RPC is not used and not needed. See edrcsetup(1m) step 3.1 for additional information.

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

RPC	TCP/UDP	111	+	+	edrc → distribute	also for:
					edrc → edrcupgrade	sat, asup,
					edrc → tail	psup, sys,
					edrc → trunk	lots

					filedist
					passwdsyncd
					rcmd
					remote_copy
					remote_shell
					rsat
					shell host
					syspoll

Details: HTTP

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

HTTP	TCP	80		x	edrc → leo
					leo
					mediawiki

		! 80	.	x	bget
					lynx
					wget

			.		thttpd

		! 8802	x		WA2L/edrc:base	testing
					thttpd

		! 8888	x		WA2L/edrc:doc
					thttpd

		! 9900	x		WA2L/edrc:report
					thttpd

		! 9902	x		WA2L/edrc:edrcapi
					thttpd

		! 8806	x		WA2L/edrc:shellinaboxd
					shellinaboxd

		8082	L		h2	local:8082
		9092				local:9092

		many	.	x	connect

Details: HTTPS

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

HTTPS	TCP	443		x	edrc → edrcupgrade	download
					edrc → leo
					leo

		! 443	.	x	lynx
					wget

			.		nginx

		! 8889	x		WA2L/edrc:doc	proxy 8888
					nginx

		! 9901	x		WA2L/edrc:report	proxy 9900
					nginx

		! 9903	x		WA2L/edrc:edrcapi	proxy 9902
					nginx

		! 8807	x		WA2L/edrc:shellinaboxd	proxy 8806
					nginx

Details: DNS, SOCKS, SSL, OTHERS

NAME	PROTOCOL	PORT	INBOUND	OUTBOUND	COMMAND / SERVICE	COMMENTS

SMTP	TCP	25		x	mail_file
					msmtp
					logcheckd

					edrc → logviewer	mail file
					edrc → scriptpack	mail file
					edrc → scriptdocbook	mail file

DNS	TCP/UDP	53		x	dig
					edrc → ping
					fssum
					hwinventory
					hostaliases
					is_running
					lots
					mail_file
					syspoll

					edrc → distribute
					edrc → trunk
					filedist
					rcmd

SSL	TCP	! 990	.	x	ftps

SOCKS	TCP	1080	.	x	connect
4/5

many	TCP/UDP	many	.	x	nc

many	many	many	.	x	nping

FILEFORMAT

OPTIONS

EXAMPLES

NOTES

BUGS

AUTHOR

edrcports was developed by Christian Walther. Send suggestions and bug reports to wa2l@users.sourceforge.net .

COPYRIGHT

This is free software; see edrc/doc/COPYING for copying conditions. There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This document was created by man2html using the manual pages.
Time: 21:26:31 GMT, September 22, 2024